Induction requirements
You must complete your online and in-person inductions to gain access to the 3D Printers.
Minimum age requirement 16+. People under the age of 16 may use the space during specific youth programmed sessions only.
Online induction In-person programmes
How the 3D printers work
Bring your designs to life with our 3D printers. Both printer types are enclosed, but the H2D is larger, has 2 print heads, and the ability to do a wider range of filament types. Use our computers to design your object or bring in your file to print.
Creating 3D prints is not always straightforward and may require some trial and error. Users should be prepared to experiment, solve problems, and fine-tune settings to achieve a successful print outcome.
Due to high initial demand, you will only be able to print designs you have created yourself. Daytime printing is limited to prints 4 hours and under. Longer prints may be accepted but will only be done overnight. Three items can be printed per night, meaning there may be a significant delay in your print being completed. Pre-payment is required for all Hawaiiki Creation Station consumables, including 3D filament. You will be notified when your print is ready to collect. We reserve the right to dispose of/gift prints not collected within three weeks of completion notification.
Supported file types:
Before a model can be printed, it must be processed by slicer software. The slicer takes the digital design and converts it into detailed printing instructions, enabling the 3D printer to construct the object layer by layer. We use the Bambu studio splicer.
Recommended design software:
- Blender
- Fusion 360
- Tinkercad
Materials available at the library:
Only filament supplied by the library may be used with these printers. This helps ensure reliable print quality and protects the equipment. If your print fails due to design error, insufficient supports for your design, or incorrect setting selections, you will still be charged for the filament used.
- ASA
charged at $2 per 10 grams.
- PLA
charged at $1 per 10 grams.
- PLA glow in the dark
charged at $3 per 10 grams.
- PVA
charged at $3 per 10 grams.
- TPU
charged at $2 per 10 grams.
Please note: colours may vary.
Bambu Lab P2S print area:
256 × 256 × 256mm
Bambu Lab H2D print area:
50 × 320 × 325mm
Back to Hawaiiki Creation Station equipment