ScanNCut

A smart cutting machine that makes it easy to create all kinds of craft projects.

ScanNCut Machine sitting on wooden table with cut designs surrounding the printer.

Induction requirements

You must complete your online and in-person inductions to gain access to the ScanNCut.

Minimum age requirement 16+. People under the age of 16 may use the space during specific youth programmed sessions only.

Online induction In-person programmes

How the ScanNCut works

A smart cutting machine that makes it easy to create all kinds of craft projects. It can cut paper, cardstock, vinyl, heat transfer vinyl (HTV), sticker paper, fabric, and more. With its built-in scanner, you can even scan your own drawings or printed designs and cut them out with ease.

Model:

Brother ScanNCut

Supported file types: 

  • PES
  • PHC
  • SVG

Machine cost:

$5 per session, per machine.

Materials available at the library:

  • Heat transfer vinyl
    For use with heat presses to adhere to fabrics
    Charged at $3 per 10cm full width.
  • Laser printer sticker paper
    Available in kraft and white. Kraft is paper, white is vinyl
    Regular library printing charges apply. Charged at $2 per A4 sheet
  • Pressure applied vinyl
    For hard surfaces. Long lasting but not permanent
    Charged at $2 per 10cm full width
  • Pre-spacing tape
    Required for weeded pressure applied vinyl
    Charged at $0.50 per 10cm full width
  • Smooth card
    Gives a beautiful finish to foiled items.
    Regular library printing charges apply. Charged at $1 per sheet
  • Toner reactive foil
    For use on laser printed deigns. Applied with high-heat laminator, thus printed material must be able to withstand heat
    Charged at $2 per 10 cm full width.

Please note: You are welcome to bring your own materials to cut on the Brother ScanNCut, however we cannot guarantee, and take no responsibility for, the desired results.

Maximum design size:

297 × 297mm 

Back to Hawaiiki Creation Station equipment